Eldes ESIM264 Instrukcja Użytkownika

GSM ALARM AND MANAGEMENT SYSTEMESIM264USER MANUALCOMPLIES WITH EN 501311 GRADE 2, CLASS II REQUIREMENTS

10Type 1 Type 2 Type 3 Type 4 Type 5Normally open contact with 5,6KΩ end of line resistorNormally closed con-tact with 5,6KΩ end of line resistorTampe

MANUAL ELDES ESIM264 V2.1 113. Basic Conguration & UseATTENTION: System conguration described in this chapte

123.2. Arming, Disarming the System & Turning O the AlarmBefore arming the system it is necessary to close all doors and windows in the secured a

MANUAL ELDES ESIM264 V2.1 131. The system will initiate the Entry Delay countdown (by default – 15 seconds) after

143.2.5 Disarm & Turn o the Alarm by EKB2/EKB3 Keyboard1. The system will initiate the Entry Delay countdown (by default – 15 seconds) after the

MANUAL ELDES ESIM264 V2.1 151. The system will initiate the Entry Delay countdown (by default – 15 seconds) after

161. To arm the system, press 1 out of 4 EWK1 buttons (by default – button) assigned to arm the alarm system. 2. The system will initiat

MANUAL ELDES ESIM264 V2.1 17UserESIM264SMS3.3 Activating STAY ModeNOTE: Delay Zone Becomes Instant in Stay Mode fe

18UserESIM264SMSEKB31. Arm the system in Stay mode manually by entering the following combination using [STAY] and number keys:Press [STAY] key &

MANUAL ELDES ESIM264 V2.1 19By, default conguration the system sends an SMS message containing violated zone or t

User Manual v2.1Valid for ESIM264 v7.11.18 and upSafety instructions Please read and follow these safety guidelines in order to maintain safety of ope

20The built-in EKB3 mini-buzzer and ESIM264 mini-buzzer (if any) provide short beeps continuously in case of alarm. In addition, the violated zone num

MANUAL ELDES ESIM264 V2.1 211. By default conguration, the SMS message mentioned in chapter 3.6 Viewing System I

221. In order to nd out the current zone & PGM output information, send the following SMS message to the sys-tem‘s phone number from any out of

MANUAL ELDES ESIM264 V2.1 231. If the temperature sensor is installed in your system, it can send an SMS message

24EKB23.10 Trouble IndicationsTrouble Name DescriptionTROUBLE 1 VIOLATED TAMPER One or more tampers are violated.TROUBLE 2 REPLACE BATTERY Backup ba

MANUAL ELDES ESIM264 V2.1 251. In order to turn ON a specied PGM output, send the following SMS message to the s

3.12 Turning ON/OFF the Electrical Appliances for a Determined Time Period1. In order to instantly turn ON a specied PGM output and keep it in this

4. If the Alarm System is Connected to Monitoring StationThe following system features become disabled automatically or may be disabled by your alarm

Made in Lithuania. www.eldes.ltiButton is a registered trademark of Maxim Integrated Products, Inc.

Limited LiabilityThe buyer must agree that the system will reduce the risk of re, theft, burglary or other dangers but does not guarantee againstsuch

41. General InformationESIM264 is an alarm system for private houses, cottages, village houses, garages, warehouses and other buildings, also capable

MANUAL ELDES ESIM264 V2.1 51.2 EKB2 Keyboard OverviewEKB2 is an LCD keyboard intended for using with ESIM264 alarm

6EKB2 LCD screen is intended for displaying alarm system status messages and alerts. Message READY is displayed on the screen that no zones are violat

MANUAL ELDES ESIM264 V2.1 71.3 EKB3 Keyboard OverviewEKB3 is a LED keyboard intended for using with ESIM264 alarm

82. Technical Specications2.1 Electrical & Mechanical CharacteristicsElectrical & Mechanical CharacteristicsMain Power Supply 16-24V 50 Hz ~

MANUAL ELDES ESIM264 V2.1 92.2 Main Unit, LED & Connector Functionality Main Unit Functionality GSM MODEM