Eldes EKB3 Instrukcja Instalacji Pobierz pdf (Strona 25)

25EN

MANUAL ELDES ESIM264 V3.1

5. CONFIGURATION METHODS

!!! In this installation manual the underscore character ”_” represents one space character. Every underscore character

must be replaced by a single space character. There must be no spaces or other unnecessary characters at the beginning

and at the end of the SMS text message.

SMS

In order to congure and control the system by SMS text message, send the text command to the ESIM264 system phone

number from one of the preset user phone numbers. The structure of SMS text message consists of 4-digit SMS password

(the default SMS password is 0000 – four zeros), the parameter and value. For some parameters the value does not apply e. g.

STATUS. The variables are indicated in lower-case letters, while a valid parameter value range is indicated in brackets.

EKB2

The system conguration and control by EKB2 keypad is carried out by navigating throughout the menu section list displayed

on LCD screen. To navigate in the menu path, touch ↓, ↑ keys to select the desired menu section and touch OK key to open the

selected section. To enter a required value, use 0... 9 keys and touch OK key for conrmation or cancel/go one menu section

back by touching ← key. The value can be typed in directly by touching 0... 9 keys while highlighting the desired menu sec-

tion. EKB2 menu type is “circle”, therefore when the last section in the menu list is selected, you will be brought back to the

beginning of the list after touching the ↓ key. In this installation manual, the menu path is based on the EKB2 menu tree by

starting at home screen view (see 31.1.1.6. EKB2 Menu Tree ). The variables are provided in lower-case letters, while a valid

parameter value range is provided in brackets.

NOTE: Menu section CONFIGURATION is secured with administrator password. The default administrator password is 1470.

NOTE: The system can be congured using only one keypad at a time. Other connected keypads will be inactive while the menu section

CONFIGURATION is opened. The inactive EKB2 keypads will display

icon and CONFIGURATION MODE message.

NOTE: The keypad will automatically exit the menu section CONFIGURATION and return to home screen view if 1 minute after the last

key-touch expires.

EKB3

The system conguration and control by EKB3 keypad is carried out by activating the Conguration mode using the adminis-

trator password (by default – administrator password is 1470) and entering a valid conguration command using the number

keys [0]... [9], [#] key for conrmation and [*] key to cancel the characters that are being entered. Alternatively, the user

can wait for 10 seconds until the keypad buzzer will provide a long beep indicating that the entered characters have been

cancelled. When typing in the characters, the indication of each pressed key is provided by short beep of keypad buzzer and

red indicators when the number keys [0]... [9] are being pressed. Some commands require [BYPS], [CODE] and [STAY] keys as

well. The structure of a standard conguration command is a combination of digits. The commands, which do not require the

Conguration mode being activated, are noted. The variables are provided in lower-case letters, while a valid parameter value

range is provided in brackets.

NOTE: If you were not willing to activate Conguration mode, but accidentally typed in the * as the rst character, please press [*] key again

or wait for 10 seconds until the keypad buzzer will provide a long beep indicating that the typed in characters have been cancelled.

Activate/deactivate

Conguration mode

EKB3

Enter administrator password:

* aaaa #

Value: aaaa – 4-digit administrator password.

Example: *1470#

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 167 168

Komentarze do niniejszej Instrukcji

Brak uwag

Eldes EKB3 Instrukcja Instalacji Strona 25

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa Eldes EKB3