Eldes EKB3 Instrukcja Instalacji Pobierz pdf (Strona 59)

59EN

MANUAL ELDES ESIM264 V3.1

EKB3

Please, refer to illuminated zone indicators ranging from 1 through 12 on the keypad. The

ashing indicator SYSTEM stands for violated high-numbered zones (Z13-Z44). For more

details on violated high-numbered zone indication, please refer to 29. INDICATION OF SYS-

TEM FAULTS.

Cong

Tool

This operation may be carried out from the PC using the ELDES Conguration Tool software.

View violated tampers

SMS

The systemwill automatically send an SMS text message, containing a violated tamper name,

to user phone number.

EKB2

Menu path:

OK → VIOLATED TAMPERS → OK → TAMPER 1... 44

EKB3

The illuminated indicator SYSTEM stands for system fault presence including violated tam-

per. For more details on violated tamper indication, please refer to 29. INDICATION OF SYS-

TEM FAULTS.

For more details details on how to disable/enable SMS text messages and phone calls to preset user phone number in case of alarm, please

refer to 17.1. Enabling and Disabling Alarm Notications

ATTENTION: Phone calls to the preset user phone number in case of alarm are disabled by force when MS mode is enabled (see

30.Monitoring Station).

NOTE: If one or more zones/tampers are violated during the alarm, the system will attempt to send as many SMS text message and dial the

user phone number as many times as the zone/tamper was violated.

NOTE: If the system sent the SMS text message and/or dialed the user phone number after disarming the system, it means that the SMS

text message and/or phone call was queued up in the memory before the system was disarmed

17.1. Enabling and Disabling Alarm Notications

By, default the system will ring the preset user phone numbers in case of alarm. To disable/enable this feature, please refer to the following

conguration methods.

Disable call in case of

alarm

EKB2

Menu path:

OK → CONFIGURATION → OK → aaaa → OK → PRIMARY SETTINGS → OK → CALL/SMS

SETTINGS → OK → CALL IN CASE ALARM → OK → DISABLE → OK

Value: aaaa – 4-digit administrator password.

EKB3

Enter parameter 30 & parameter status value:

30 1#

Example: 301#

Cong

Tool

This operation may be carried out from the PC using the ELDES Conguration Tool software.

Enable call in

case of alarm

EKB2

Menu path:

OK → CONFIGURATION → OK → aaaa → OK → PRIMARY SETTINGS → OK → CALL/SMS

SETTINGS → OK → CALL IN CASE ALARM → OK → ENABLE → OK

Value: aaaa – 4-digit administrator password.

EKB3

Enter parameter 30 & parameter status value:

30 0#

Example: 300#

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 167 168

Komentarze do niniejszej Instrukcji

Brak uwag

Eldes EKB3 Instrukcja Instalacji Strona 59

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa Eldes EKB3