Eldes EKB3 Instrukcja Instalacji Pobierz pdf (Strona 57)

57EN

MANUAL ELDES ESIM264 V3.1

16. TAMPERS

The tamper circuit is a single closed loop such that a break in the loop at any point will cause a tamper alarm regardless of the system

status – armed or disarmed. During the tamper alarm, the system will activate the siren/bell and the keypad buzzer and send the SMS text

message to the preset user phone number. The system will cause tamper alarm under the following conditions:

• If the enclosure of a detection device, siren/bell, metal cabinet or keypad is opened, the physical tamper switch will be triggered. By

default, indicated as Tamper x in the SMS text message (x = tamper number).

• If the wireless signal is lost due to low signal level or low battery power on a certain wireless device and does not restore during 20

minute period. This event is identied as Wireless Signal Loss. By default, indicated as Tamper x * in the SMS text message (x = tamper

number; * = wireless signal loss).

By default, tamper alarm notication by SMS text message is enabled. To disable/enable tamper alarm notication, please refer to the

following conguration methods.

Disable tamper alarm

notication

EKB2

Menu path:

Tamper alarm: OK → CONFIGURATION → OK → aaaa → OK → SMS MESSAGES → OK →

TAMPER EVENT → OK → DISABLE → OK

Wireless signal loss: OK → CONFIGURATION → OK → aaaa → OK → SMS MESSAGES → OK →

WLESS SIGN LOSS EV → OK → DISABLE → OK

Value: aaaa – 4-digit administrator password.

EKB3

Enter parameter 25, event number & parameter status value:

25 08 0 # - Tamper alarm

25 11 0 # - Wireless signal loss

Example: 25110#

Cong

Tool

This operation may be carried out from the PC using the ELDES Conguration Tool software.

Enable tamper alarm

notication

EKB2

Menu path:

Tamper alarm: OK → CONFIGURATION → OK → aaaa → OK → SMS MESSAGES → OK →

TAMPER EVENT → OK → ENABLE → OK

Wireless signal loss: OK → CONFIGURATION → OK → aaaa → OK → SMS MESSAGES → OK →

WLESS SIGN LOSS EV → OK → ENABLE → OK

Value: aaaa – 4-digit administrator password.

EKB3

Enter parameter 25, event number & parameter status value:

25 08 1 # - Tamper alarm

25 11 1 # - Wireless signal loss

Example: 25081#

Cong

Tool

This operation may be carried out from the PC using the ELDES Conguration Tool software.

For more details on how to view violated tamper, please refer to 17. ALARM INDICATIONS AND NOTIFICATIONS

16.1. Tamper Names

Each tamper has a name that can be customized by the user. The tamper names are used in SMS text messages that are sent to the user

during the tamper alarm. By default, the tamper names are: Tamper 1, Tamper 2, Tamper 3, Tamper 4 etc. To set a dierent tamper name,

please refer to the following conguration methods.

Manage tamper name

Cong

Tool

This operation may be carried out from the PC using the ELDES Conguration Tool software.

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 167 168

Komentarze do niniejszej Instrukcji

Brak uwag

Eldes EKB3 Instrukcja Instalacji Strona 57

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa Eldes EKB3