Eldes EKB3 Instrukcja Instalacji Pobierz pdf (Strona 27)

27EN

MANUAL ELDES ESIM264 V3.1

Initiate the

connection to

third-party server

In case it is necessary to establish a connection between ESIM264 system and a third-party

conguration server, send the following SMS text message.

SMS

SMS text message content:

ssss_STCONFIG:add.add.add.add:Port or ssss_STCONFIG:host-name:pprrt

Value: ssss – 4-digit SMS password; add.add.add.add – public IP address of third-par-

ty conguration server; pprrt – port number of third-party conguration server, ran-

ge – [1... 65535]; host-name – public host-name of third-party conguration server.

Example: 1111_STCONFIG:62.80.115.102:4522

NOTE: Public IP address (host-name) and port number are necessary when connecting to a third-party-server for the rst time only.

When connecting to the server next time, ssss_STCONFIG is enough as the IP address (host-name) and port number are saved in the

device memory after the rst successful connection.

Connecting to ELDES Conguration Server using ELDES Conguration Tool Software

• Run ELDES Conguration Tool software.

• Press Remote Conguration button.

• In the next window, select Connect to Remote

Server (recommended) and press Next button.

• Enter the received IMEI number in Device IMEI entry.

• Press Continue button.

• Upon the successfully established connection,

the system prompts for an administrator password.

• By entering a valid administrator password, the

sys tem grants access to full conguration remotely.

• Remote Conguration Management

window displays all performed conguration actions.

Ending the Conguration Process

Shut down the

Connection with the

Server

After the system conguration is complete, use one of the following methods to end the conguration

process:

• Press Disconnect button and close ELDES Conguration Tool software;

• Wait for the system to reply with an SMS text message conrming the end of the session;

• Shut down the connection with the server at any time by sending an SMS text message.

SMS

SMS text message content:

ssss_ENDCONFIG

Value: ssss – 4-digit SMS password.

Example: 1111_ENDCONFIG

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 167 168

Komentarze do niniejszej Instrukcji

Brak uwag

Eldes EKB3 Instrukcja Instalacji Strona 27

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa Eldes EKB3