Eldes EKB3 Instrukcja Instalacji Pobierz pdf (Strona 81)

81EN

MANUAL ELDES ESIM264 V3.1

24. TEMPERATURE SENSORS

The system may be equipped with a temperature sensor intended for temperature measurement in the surrounding area. This feature

allows to monitor the temperature in real-time and receive a notication by SMS text message to User 1 phone number when the set

temperature boundaries are exceeded.

24.1. Adding, Removing and Replacing Temperature Sensors

To add a temperature sensor to the system, do the following:

a) Shutdown the system.

b) Wire up the temperature sensor to the 1-Wire interface terminals (see 2.3.5. Temperature Sensor and iButton Key Reader for

temperature sensor wiring diagram).

c) Power up the system.

The real-time temperature value of the temperature sensor is included in the Info SMS text message (see 26. SYSTEM INFORMATION.

INFO SMS) as well as it is indicated in the home screen view of EKB2 keypad.

To view the real-time temperature value measured by the temperature sensor, please refer to the following conguration methods.

View real-time

temperature value

SMS

SMS text message content:

ssss_INFO

Value: ssss – 4-digit SMS password.

Example: 1111_INFO

EKB2

Refer to home screen view on the keypad.

24.2. Setting Up MIN and MAX Temperature Boundaries. Temperature Info SMS

The system supports an SMS text message identied as the Temperature Info SMS, which is automatically delivered to User 1 phone num-

ber if the preset minimum (MIN) or maximum (MAX) temperature boundary of any temperature sensor is exceeded.

To set the MIN and MAX temperature boundaries for a certain temperature sensor, please refer to the conguration methods.

Set MIN and MAX

temperature

boundaries

SMS

SMS text message content:

ssss_TEMP:mnn:mxx

Value: ssss – 4-digit SMS password; mnn – MIN boundary, range – [-55... 125] C; mxx - MAX

boundary, range – [-55... 125] C.

Example: 1111_TEMP:-5:28

EKB2

Menu path:

MIN: OK → CONFIGURATION → OK → aaaa → OK → PRIMARY SETTINGS → OK →

TEMPERATURE SENSOR → OK → TEMP. MIN → OK → mnn → OK

MAX: OK → CONFIGURATION → OK → aaaa → OK → PRIMARY SETTINGS → OK →

TEMPERATURE SENSOR → OK → TEMP. MAX → OK → mxx → OK

Value: aaaa – 4-digit administrator password; mnn – MIN boundary, range – [-55... 125] C;

mxx - MAX boundary, range – [-55... 125] C.

Keys P1 or P2 are used to enter minus character, e.g. -20.

EKB3

Enter parameter 19 & temperature boundary value:

19 mnn mxx #

Value: mnn – MIN boundary, range – [-55... 125] C; mxx - MAX boundary, range – [-55... 125]

C. 00 value stands for minus character, e. g. 0020 = -20

Example: 19001532#

Cong

Tool

This operation may be carried out from the PC using the ELDES Conguration Tool software.

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 167 168

Komentarze do niniejszej Instrukcji

Brak uwag

Eldes EKB3 Instrukcja Instalacji Strona 81

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa Eldes EKB3